IF-908 Interferential Stimulator (IF) With True Sine Wave

Description

The interferential stimulator (IF) device is a battery operated device that includes two controllable output channels. Amplitude, mode and duration of the electrical impulses can be altered with the buttons or knobs. The controls are protected by a cover in order to prevent accidental changes to the settings. Slide the cover down to make adjustments to the controls.
TECHICAL DESCRIPTION
01 Channel:
Dual, isolated between channels
02 Dimensions:
107x62x27mm
03 Weight:
Approximately 150 grams, battery included
04 Amplitude:
Adjustable 0-60mA peak into 500 ohm load each channel, constant current
05 Carrier Frequency:
4000Hz, Fixed (CH1)
06 Modulating Frequency:
4-160bps, Adjustable (CH2)
07 IF Frequency Modes:
9 modes, 1 constant mode, 5 frequency shift modes, 3 auto sweep Modes
08 Constant Mode:
4-160bps, Adjustable
09 Auto Sweep:
4-45 bps
80-145 bps
4-SET bps
10 Frequency Shift:
Five modes,
1/1 abrupt shift
6/6 abrupt shift
6/6 ramped
10/10 abrupt shift
10/10 ramped
bps adjustable
11 Sweep Time:
15 seconds
12 Frequency Shift Percent:
Frequency shifts from 30% below the set frequency to 60% above and then return to 30% below the set frequency.
13 Output Configuration:
Quad polar (4 electrodes)
14 Wave form:
Symmetrical Balanced Sine Wave
15 Interference Pulse Frequency
: 4-160 bps, Adjustable, 4 bps/step
16 Pulse Duration
: 125 µs maximum
17 Patient Compliance Meter:
Display total treatment time
18 Lock:
Prevents the patient from accidentally changing any of the set parameters
19 Timer:
15, 30 minute selectable
20 LCD:
Displays mode, bps rate, abrupt/ramp, timer, and channels
21 Max charge per Pulse:
15 Micro-coulombs Maximum
22 Low Battery:
A low battery indicator will show when the battery is low.
23 Power Source:
9 Volt DC adapter, 500mA or 9 volt alkaline battery (not recommend due its short life)
24 Tolerance:
There may be +/-10% tolerance of settings and 20% tolerance of output.
2 year warranty